您好,欢迎访问苏州赛浦斯电子有限公司官网
简体中文   |   English   |   理合作   |   关于我们   |   联系我们
咨询热线
0512-66324802
产品中心
WVE9000-MW8 8寸可调节

WVE9000-MW8 8寸可调节

The WAFER-VAC™ ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER™ uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER™ is available in various kits depending on your handling application. 

NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK™ Wafer Tip sizes available.

These ESD-SAFE kits feature:

 Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).

 Bar graph power-on and vacuum-level indicator.

 Class 100 Cleanroom Safe.

 Whisper-quiet operation.

 Long-life pump.

 Side mounted handle holder.

 Rubber no-skid feet.

 ESD ground connection is by three wire power cord.

 Produces vacuum of up to ten inches of mercury.

 Replaceable inlet filter.

This kit includes:

 COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)

 PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)

 Molded PEEK™ WAFER TIP (VMWT-C)

 3 WIRE POWER CORD


0.00
0.00
  

The WAFER-VAC™ ELITE was developed as a result of customer concerns about firmly grasping critical components and not dropping them due to  a vacuum leak.  This VACUUM TWEEZER™ uses an integrated ten segment bar-graph-display visibly shows the vacuum level present during operation.  The bar graph will show minimum vacuum pressure until a part is grasped and then when a part is grasped the bar graph displays the vacuum level presented to the part being handled.  Additionally, the vacuum port integrates a user replaceable inlet filter that protects operation of the tool from dust particles.  This VACUUM TWEEZER™ is available in various kits depending on your handling application. 

NOTE: This item will not function properly without filter, see below for replacement intake filters (VF-40M-5).  NOTE: Other Molded PEEK™ Wafer Tip sizes available.

These ESD-SAFE kits feature:

 Dimensions 8” X 3” X 3.5” (203mm X 76mm X 89mm).

 Bar graph power-on and vacuum-level indicator.

 Class 100 Cleanroom Safe.

 Whisper-quiet operation.

 Long-life pump.

 Side mounted handle holder.

 Rubber no-skid feet.

 ESD ground connection is by three wire power cord.

 Produces vacuum of up to ten inches of mercury.

 Replaceable inlet filter.

This kit includes:

 COILED-VACUUM-HOSE-6 (VCH-2.5MM-6-BLK)

 PUSH-BUTTON-WAFER-PEN (VWP-500-2.5MM)

 Molded PEEK™ WAFER TIP (VMWT-C)

 3 WIRE POWER CORD