您好,欢迎访问苏州赛浦斯电子有限公司官网
简体中文   |   English   |   理合作   |   关于我们   |   联系我们
咨询热线
0512-66324802
产品中心
VVSV-NC-X 内置真空 常闭

VVSV-NC-X 内置真空 常闭

The STEALTH-VAC ELITE operates directly on 30 to 50 psi FILTERED compressed air or nitrogen.   The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed.  This helps conserve factory compressed air when the tool is not in use.  The vacuum level can be controlled by adjusting the input pressure.   At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.

This kit includes 6 feet of 1/16” coiled air hose, a 1/8” NPT to 1/16” barb adapter for the supply line and the vacuum generating handle.  With FILTERED compressed air supplied at the rear of the tool it is ready for use as follows:


1.    Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2.    Touch the vacuum tip squarely to the part and depress and hold the button.  The part is now   grasped.
3.    Move the part to where you want it.  Release the control button to release the part.

Stualth-VAC精英直接运行在30至50磅/平方英寸-4-5KG的过滤压缩空气或氮气。通常关闭的隐形真空精英真空笔包含一个静音文丘里真空发生器,只有当控制按钮被按下时才激活。这有助于在不使用工具时节约工厂压缩空气。真空度可通过调节输入压力来控制。在50psi输入时,真空度为21InHg,自由空气流量为2lpm;在30psi输入时,真空度为18InHg,自由空气流量为1.75lpm;在10psi输入时,真空度为3InHg,自由空气流量为0.75lpm。


这个套件包括6英尺1/16英寸的卷绕式空气软管,1/8“NPT-1/16”的供应线倒钩适配器和真空产生手柄。当过滤后的压缩空气在工具的后部提供时,可以使用如下:



1。安装一个真空镊子尖端比你需要处理的部分稍小。

2。将真空尖端直接接触到零件并按下并按住按钮。这个部分现在已经掌握了。

三。把零件移到你想要的地方。释放控制按钮释放零件。


0.00
0.00
  

The STEALTH-VAC ELITE operates directly on 30 to 50 psi FILTERED compressed air or nitrogen.   The normally closed Stealth-Vac Elite vacuum pen contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed.  This helps conserve factory compressed air when the tool is not in use.  The vacuum level can be controlled by adjusting the input pressure.   At 50 psi input the vacuum level is 21 InHg with 2 lpm of free air flow, at 30 psi input the vacuum level is 18 InHg with 1.75 lpm of free air flow and at 10 psi input the vacuum level is 3 InHg with .75 lpm of free air flow.

This kit includes 6 feet of 1/16” coiled air hose, a 1/8” NPT to 1/16” barb adapter for the supply line and the vacuum generating handle.  With FILTERED compressed air supplied at the rear of the tool it is ready for use as follows:


1.    Attach a vacuum tweezer tip slightly smaller than the part you need to handle.
2.    Touch the vacuum tip squarely to the part and depress and hold the button.  The part is now   grasped.
3.    Move the part to where you want it.  Release the control button to release the part.

Stualth-VAC精英直接运行在30至50磅/平方英寸-4-5KG的过滤压缩空气或氮气。通常关闭的隐形真空精英真空笔包含一个静音文丘里真空发生器,只有当控制按钮被按下时才激活。这有助于在不使用工具时节约工厂压缩空气。真空度可通过调节输入压力来控制。在50psi输入时,真空度为21InHg,自由空气流量为2lpm;在30psi输入时,真空度为18InHg,自由空气流量为1.75lpm;在10psi输入时,真空度为3InHg,自由空气流量为0.75lpm。


这个套件包括6英尺1/16英寸的卷绕式空气软管,1/8“NPT-1/16”的供应线倒钩适配器和真空产生手柄。当过滤后的压缩空气在工具的后部提供时,可以使用如下:



1。安装一个真空镊子尖端比你需要处理的部分稍小。

2。将真空尖端直接接触到零件并按下并按住按钮。这个部分现在已经掌握了。

三。把零件移到你想要的地方。释放控制按钮释放零件。